![]() If you discover sensors that are not linked to the keypad, you will need to re-link them. To exit Test mode, press the Disarm button once again. If not, there will be no response from the keypad, and you will have to re-link the sensor to the keypad. If the sensors are linked to the keypad, the keypad will play an alert sound and indicate the Zone number. Now press the number 1, then walk around and open and close any windows or doors that you want to test. backup battery needs to be replaced when the keypad displays a BAT or SYSTEM. The keypad will respond by playing a melody. First Alert 148 & 168 residential security systems have a backup battery. First, enter Test mode on the keypad by pressing the Disarm (insert icon) button on the keypad, followed by swiping a contactless tag or entering your PIN code. Perform a walk test to ensure the ID of the sensor has been learnt into a zone (1-3).If the above does not work, try a walk test. Check and replace the battery in the door and window sensor.Ensure that the gap between the Magnet and Sensor is no more than than 10mm.Ideal for Honeywell alarm systems, this guide is an essential resource for. Link the sensor with your existing Honeywell Home doorbell or home alarm kit, and get alerts whenever a door or window has been left open, or when someone enters or leaves your home. Enjoy added peace of mind with the HS3MAG1N Wireless door and window sensor. Designed for use with ADEMCO control panels, these addressable keypads can be surface mounted and have dedicated function keys for special functions. HS3MAG1NWireless door and window sensor White. Ensure the battery isolation tab has been removed from the side of the sensor. This installation and setup guide provides detailed information for the ADEMCO 6150 and ADEMCO 6160 Remote Keypads, including their features, displays, and LED functions. ![]() Ensure that the sensor is within effective radio range of the Keypad and is not mounted close to metal objects which may interfere with the wireless radio transmission.Try one of the following solutions in this order: Please refer to the table below for the attenuation characteristics of different types of materials. For example, if there are 2 walls in the way, the range will potentially be reduced by up to 40% by each wall. ![]() The effect on the range of multiple walls is cumulative. For example, internal walls may give around 20% reduction but this depends on the make up of the wall itself.
0 Comments
Leave a Reply. |